TL;DR: 4K VP9 Decoder Dongle Board with OTA Upgrade
AndroidSBC sourcing desk: Allwinner H618 TV stick board pricing held flat through the current quarter serving Berlin, Germany. The WF-H618-01 Allwinner H618 Android motherboard spans the entry HDMI dongle build for TV replacement and eleven sister configurations in the WF-H618 series, all built on the H618 quad-core ARM Cortex-A53 1.5GHz SoC with the ARM Mali-G31 MP2 GPU, HDMI 2.0a 4K*2K UHD output at 60Hz, and Android 12 with OTA upgrade firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-H618 family from the Longgang source factory in Shenzhen to Berlin and Germany importers who run streaming sticks, Android TV boxes, IPTV channel lineups, digital signage networks, casting programmes and smart home hubs.
About AndroidSBC and the Allwinner H618 Android Motherboard Family
The WF-H618 family from AndroidSBC, a Wanlin Manufacturing Group export brand, is a single-silicon HDMI dongle board line: all twelve configurations share the Allwinner H618 SoC, the Mali-G31 MP2 GPU and one Android 12 build. For Berlin buyers the practical consequence is that a pilot batch qualified on one configuration behaves the same way on the next, whether the screen is a hotel TV or a retail video wall. Each production lot is burned in for 72 hours with the HDMI output live, the playback loop running and the remote path exercised, and the serial number is logged against the test record so a Berlin partner can trace a single unit back to its run.
WF-H618-01 Technical Specifications
| Parameter | AndroidSBC WF-H618-01 (entry HDMI dongle build for TV replacement) | Industry Average |
|---|---|---|
| Processor | H618 quad-core ARM Cortex-A53 1.5GHz SoC | Older dual-core or quad-core Cortex-A7 SoC |
| Process node | 28nm | Older 40nm process |
| GPU | Mali-G31 MP2 | Older Mali-400 or basic 2D GPU |
| Memory | 2GB LPDDR4 | DDR3 512MB or 1GB on competing boards |
| Storage | 16GB eMMC plus TF card up to 64GB | NAND flash 4GB or 8GB on competing boards |
| Video decode | VP9 Profile-2 and H.265 Main10 at 4K 60fps, AVS2 10bit at 4K 60fps, H.264 at 4K 30fps | 1080p decode ceiling on competing boards |
| Display output | HDMI 2.0a 4K*2K UHD output at 60Hz | HDMI 1.4 1080p output only |
| Audio and image | MP3, AAC, WMA, RM, FLAC and Ogg audio plus HD JPEG, BMP, GIF, PNG and TIF image | MP3 audio and JPEG image only |
| Wireless and control | WiFi 802.11 a/b/g/n/ac/ax dual-band 2.4G and 5.8G with IR receiver plus 2.4G wireless mouse and keyboard | Single-band 2.4G WiFi 802.11n with no IR receiver |
| Interfaces | 1 HDMI, 2 USB with host and OTG, 1 IR receiver, 1 TF card slot | One USB port and no TF card slot |
| Operating system | Android 12 with OTA upgrade | Android 9 or Android 10 on competing boards |
| Power and reliability | DC 5V/1.5A with blue working and red standby LED, 0C to 40C operating ambient | No RTC and no scheduled power-on |
All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-H618-01 (entry HDMI dongle build for TV replacement) holds its 4K HDMI output plus the remote and control path while running the 72-hour burn-in loop, a configuration that competing single-platform boards rarely document at the top of the temperature window. For Germany importers sourcing the WF-H618 family, the WF-H618-01-A variant is the typical configuration for the consumer TV modernisation rollout use case, in a compact dongle footprint with a sustained weekly capacity of 5000 pcs/wk.
Challenges in Sourcing Allwinner H618 Android Motherboards for Germany Buyers
Power is the third wall. A 5V/1.5A adapter that was fine on the bench browns out behind a television with a shared USB port, and Berlin integrators routinely discover this after the units are already installed in guest rooms.
On the control side the mapping ships in the carton. IR receiver, Bluetooth voice remote and the 2.4G wireless mouse and keyboard enumerate without a pairing pass, so the Berlin integrator plugs the dongle in and the guest picks up the remote and it works, and the BNetzA documentation covers the radio modules too. AndroidSBC logged the 2nd shipment to Berlin on September 28, 2026 - 32200 boards on the Hamburg - Shenzhen lane, each serialised against its burn-in record and each carrying the same Android 12 baseline.
Competitive Comparison: WF-H618-01 vs Competing Android TV Dongle Boards
For Berlin integrators the decision usually comes down to whether the vendor can document an output profile, ship a remote mapping, and produce a test record - the four points below.
- Output and control readiness: HDMI 2.0a or 2.1 at 4K*2K UHD with IR, Bluetooth and 2.4G control paths enumerated, so Berlin integrators mount a locally sourced screen without a pairing pass.
- Bundled integration: HDMI output profile, remote control mapping, language packs, playback modes and the peripheral driver set ship in the carton; competing dongle boards sold to Berlin usually ship a board only.
- Compliance files: CE, FCC, RoHS and the destination conformity route travel with the lot, which competing board vendors often leave to the Berlin integrator to obtain.
- Long-term supply: 16GB onboard eMMC with a TF card slot up to 64GB, one fixed bill of materials per production lot and a seven-year firmware window, against the frequent component swaps seen on competing boards reaching Berlin.
Global Android TV, OTT Streaming and Smart Display Market Trends
Estimates of the category differ by scope, and the spread is useful. Stats Market Research puts 2025 revenue at USD 8.19 billion on the way to USD 17.38 billion by 2032 at 11.7 percent CAGR; Dataintelo sizes the same category at USD 11.4 billion in 2025 with Asia Pacific taking 38.5 percent of revenue and 4K holding 42.3 percent by type. A Berlin buyer reading both gets the same conclusion: entry HDMI dongle build for TV replacement is the volume configuration.
- Entry playback tier: WF-H618-01 covers loop, scheduled and interrupt playback on a single HDMI screen, which is the configuration most small streaming networks standardise on.
- Interactive mainstream tier: WF-H618-05 pairs a 4K HDMI output with IR, Bluetooth and 2.4G control for hospitality rooms, meeting spaces and classrooms.
- Connected and unattended tier: WF-H618-06 adds the RTC, the auto power-on behaviour and the watchdog recovery that retail signage and unattended lobbies require.
For Berlin buyers the reading is straightforward: the market is growing on replacement, not on first-time installation, so the board that wins is the one that fits the television already on the wall.
Partner Success Story: Loire Flux Streaming (telecom operator device integrator)
The Loire Flux Streaming case in the France telecom retail segment is a working example of how the WF-H618 family from AndroidSBC supports Berlin integrators. Loire Flux Streaming distributed 32200 WF-H618 boards through an operator store network.
- OEM relationship: AndroidSBC private-label SKU shipped with Loire Flux Streaming branding and CE / FCC / RoHS files bundled.
- Silicon lock: Allwinner H618 quad-core ARM Cortex-A53 1.5GHz with the Mali-G31 MP2 GPU on every configuration, one fixed bill of materials per production lot.
- Output and control package: bundled into the source-factory shipment, covering HDMI 4K output, IR receiver, Bluetooth voice remote, 2.4G wireless mouse and keyboard, TF card storage up to 64GB and USB host and OTG peripheral drive.
- Unattended-operation tools: hardware watchdog, RTC, auto power-on after mains failure, scheduled power cycling, kiosk-mode lockdown and staged OTA with rollback bundled.
- Compliance paperwork: CE / FCC / RoHS plus BNetzA conformity, all bundled into the Shenzhen source-factory shipment.
Loire Flux Streaming Device Buyer for France Telecom Retail noted: Loire Flux Streaming took the H618 board for French language packs and the standby power figure, with 32200 units into the Berlin operator estate.
Field Report: consumer TV modernisation rollout at a retail electronics chain
YANTIAN, September 28, 2026 - Lin Yao, AndroidSBC field desk. For the entry HDMI dongle build for TV replacement brief the WF-H618-01 was configured with the IR receiver mapped and the 2.4G control path enabled, the combination the Germany partner runs in production. The WF-H618-01 Allwinner H618 board order for Berlin, Germany cleared the burn-in station on schedule and is en route via the Hamburg - Shenzhen lane.
The WF-H618-01 entry HDMI dongle build for TV replacement production lot includes the WF-H618-01-A variant as the typical configuration, with HDMI output profile, remote control mapping and staged OTA management bundled into the source-factory shipment. For Germany integrators, the BNetzA conformity plus CE marking with BNetzA radio interface registration and the GS mark paperwork is bundled.
Filed by Lin Yao, AndroidSBC field desk, YANTIAN. German distributors expect a GS mark safety file on the adapter and German language packs, and they audit the standby power figure against the building energy plan.
WF-H618-01 Application Scenarios
The WF-H618-01 entry HDMI dongle build for TV replacement sits inside a twelve-configuration WF-H618 Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-H618-01-A configuration is the typical build for the consumer TV modernisation rollout use case, with HDMI output profile, remote mapping and staged OTA management bundled.
- Streaming stick and TV modernisation: the WF-H618-01 turns an installed television into a 4K streaming screen without replacing the panel.
- Operator and IPTV channel lineups: the WF-H618-07 carries the language packs, the launcher and the OTA client the operator already sells.
- Screen casting and mirroring: the WF-H618-08 takes Miracast, DLNA and AirPlay traffic into meeting rooms and classrooms over dual-band WiFi.
- Hospitality rooms and serviced apartments: the WF-H618-09 pairs the auto power-on schedule with the IR and Bluetooth remote path a guest expects.
- Retail media and menu boards: the WF-H618-10 drives a 4K loop on shopfront and in-aisle screens from onboard eMMC.
- Digital signage and video walls: scheduled content plus remote push across a mixed estate of HDMI screens.
- Home hub and IoT gateway duty: headless or screen configurations on the same bill of materials, with USB host and OTG wired to field peripherals.
- Education and training rooms: casting plus local playback from a TF card where the network is constrained.
- Retrofit programmes in Berlin: the same compact dongle board re-uses the installed screen, mount and power path, so an estate can be upgraded room by room.
Partnership Models for Berlin Buyers
Three tracks exist because Berlin partners arrive from three directions: as a distributor with stock, as an integrator with a customer, or as a brand owner with a label.
- Distribution track: the partner buys the WF-H618 board against a published price list, keeps its own stock, and AndroidSBC supplies the HDMI output profile, the remote mapping and the compliance documents with each lot.
- Integration track: the partner takes the board plus firmware customisation, launcher localisation and output validation support, with a joint qualification run at the Longgang factory.
- Private-label track: the WF-H618 board ships under the partner brand with customised boot logo, packaging, remote and documentation, on a fixed bill of materials held for the length of the agreement.
Whether Germany partners take distribution, integration or private label, the WF-H618 board underneath carries the same serialised test record.
Frequently Asked Questions
Does the Allwinner H618 board family support an entry HDMI dongle build for TV replacement?
Answer: It is. The WF-H618 family was specified around entry HDMI dongle build for TV replacement, and every board in the family is validated on that use case before it leaves the Longgang factory.
Which configurations are available in the WF-H618 family for Germany buyers?
Answer: The WF-H618 family spans 2GB LPDDR4 with 16GB onboard eMMC plus a TF card slot up to 64GB, HDMI 2.0a or HDMI 2.1 at 4K*2K UHD, and IR, Bluetooth or 2.4G control. For Germany buyers the choice is driven by screen availability and by whether the site needs unattended power cycling.
Can one H618 dongle drive a 4K HDMI screen and take IR, Bluetooth or 2.4G input?
Answer: It does. The HDMI output profile and the control mapping are validated together on the Longgang bench against the screen model the Berlin partner names, and the result is written into the shipment file.
What is the minimum order quantity and the sample lead time for Germany?
Answer: A Germany buyer can start at one carton. Samples leave Longgang in 1-3 days, and volume production is scheduled on a 15-30 day window against a frozen bill of materials.
Is custom ROM, boot logo or pre-installed app development available?
Answer: It is. The AndroidSBC software desk delivers a customised Android 12 build with the partner launcher and app set, plus an SDK and BSP package for Berlin developers working on top of it.
How are firmware updates delivered to a Germany device estate after deployment?
Answer: Updates are delivered over a staged OTA channel. The Germany team pilots on a small group of units, then releases across the estate, and every build carries a rollback image.
What shipping terms does AndroidSBC support for Germany orders?
Answer: AndroidSBC supports FOB Shenzhen, CIF and EXW terms, and ships to Amazon FBA warehouses or third-party consolidation warehouses on the Port of Hamburg lane for Germany orders.
What happens if a unit fails in the field in Germany?
Answer: Field failures are handled against the serialised test record. The Berlin partner files the serial number, AndroidSBC traces the bench run, and a replacement from the same configuration ships on the next lane.
Contact AndroidSBC: Start Your WF-H618-01 Sourcing Conversation
AndroidSBC, a Wanlin Manufacturing Group export brand, opens the following channels for the Allwinner H618 dongle family. Berlin integrators can reach the export desk through:
- Email: Androidsbc@163.com
- Export service hotline: +8613261677119
- Website: https://www.androidsbc.com
- Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
For Berlin and Germany the sample lead is 1-3 days and the mass-production lead is 15-30 days. AndroidSBC, a Wanlin Manufacturing Group export brand, commits to a seven-year firmware update window.
