RK3588 Custom SATA Interface Board, WF-C3588-N6, AndroidSBC, Berlin

TL;DR: RK3588 Custom SATA Interface Board

SHENZHEN, China, September 12, 2026 - Wanlin Manufacturing Group pushed lot 284 of the WF-C3588-N6 board out of the Longgang plant this week, 34,290 units for Berlin, Germany, with the export declaration naming Longgang as the place of origin.

AndroidSBC regulatory bulletin on CE, FCC, UKCA, RoHS and IEC 62368-1 coverage for the WF-C3588 serving Berlin, Germany. AndroidSBC is releasing the full WF-C3588 custom motherboard line for Berlin and Germany: nine variants built on the Rockchip RK3588 octa-core 6 TOPS NPU platform, covering custom Android motherboards, custom industrial boards, core board and SOM carrier design, custom signage and video wall boards, custom kiosk and POS boards, custom robotics controllers, custom NVR boards, custom edge AI boards, and custom ARM PC and NAS boards. The line ships from the Wanlin Longgang facility with OEM branding, ODM carrier work, and per-lot CE, FCC, UKCA, RoHS and IEC 62368-1 documentation handled in-house.

About AndroidSBC and the Rockchip RK3588 Board Family

The WF-C3588 exists because Germany buyers kept asking one supplier for two different custom board tiers. Wanlin Manufacturing Group answered by putting nine custom variants on the same Rockchip RK3588 octa-core silicon with 6 TOPS NPU, 8K H.265 video and up to 32GB of LPDDR5. The group runs SMT, burn-in and pre-compliance testing in one Longgang building in Shenzhen, and the export desk holds the certification file rather than passing it back to the importer. For a Berlin distributor that means one vendor file, one document format and one MOQ structure across the custom variants it sells.

WF-C3588-N6 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-C3588-N6 (Custom NVR and Security Surveillance Board) holds its display output and its decoder load at the same time through the burn-in loop, a combination that the legacy boards in the comparison column cannot sustain. For Germany importers sourcing the WF-Series, the 16GB + 128GB (WF-C3588-N6-C) variant is the typical configuration for the custom NVR and surveillance programmes use case, with a sustained weekly capacity of 5,000 pcs/wk on the Longgang line.

Challenges in Sourcing Custom NVR and Security Surveillance Board for Germany Buyers

The custom nvr and security surveillance board sourcing question that Berlin distributors keep coming back to is continuity across quarters. The Rockchip RK3588 requires a dedicated wafer slot, and a 34,290-unit order placed against broker inventory often turns into a two-month slip with no warning. Then comes the software layer. A board that boots is not a board that holds a certified stack under a 72-hour loop, and Germany buyers typically find the difference in their own warehouse rather than at the factory.

Documentation closes the list. Buyers in Berlin have learned to request the test reports before releasing the deposit, because a mark printed on a carton carries no weight at the port if the Technical File behind it does not exist. AndroidSBC handles it by doing the custom I/O build, the software burn and the documentation at the factory: every lot leaves Longgang with the certified image loaded, a unit-level burn-in barcode, and a Technical File that carries the test reports. The nine WF-C3588 custom variants cover smart NVRs, multi-camera recorders, face recognition terminals, access control, turnstile controllers, intercom stations, LPR cameras, perimeter systems, and behaviour analytics with three memory configurations each, which means a Berlin integrator can usually match a customer requirement without a bespoke production run.

For Germany specifically, the file travels with the goods. In Germany technical buyers ask for the full test report set rather than a declaration, and the GS mark is often requested on top of CE for consumer-facing product. AndroidSBC prepares the CE marking with BNetzA radio interface registration and the GS mark documentation for BNetzA, attaches the standard multi-market pack (CE, FCC, UKCA, RoHS, REACH), and consigns the lot to Port of Hamburg on the Hamburg to Yantian lane.

Competitive Comparison: WF-C3588-N6 vs Competing RK3588 Boards

Three families of board chase the same custom nvr and security surveillance board socket. The first is catalogue hardware with fixed memory and fixed I/O, the second is re-badged stock where nobody owns the schematic, and the third is a real custom platform built by the factory that runs the SMT line. The WF-C3588-N6 belongs to the third family and separates itself on Rockchip RK3588, on customization depth from schematic to firmware, and on a certified image burned per lot.

• vs generic NVR chipsets: the WF-C3588-N6 carries the analytics on the 6 TOPS NPU, so the recorder does not ship a cloud subscription as a hidden dependency.
• vs PC-based recorders: a fanless board replaces a workstation-class recorder and survives gate cabinets and outdoor enclosures.
• vs camera-side AI splits: one board class covers the NVR, the face terminal and the turnstile, which simplifies spares and firmware across one estate.
• vs unbranded surveillance boards: the per-lot file and the burn-in record are what an installer needs when a perimeter line has to answer for uptime.

Global Custom NVR and Surveillance Board Market Trends

Buyers in Berlin are reading the Custom NVR and Surveillance Board curve before they commit to a custom nvr and security surveillance board programme. MarketsandMarkets reports the Edge AI hardware segment at USD 26.9 billion in 2025 with a 32.7 percent CAGR to USD 108.2 billion by 2030 (MarketsandMarkets, 2025-2030), used here as the RK3588-class silicon baseline rather than as a number for this category. That baseline breaks into three practical demand patterns for the WF-C3588 in Germany:

• City surveillance NVR: a municipal programme records and analyses sixteen channels per node on a fanless board.
• Display and signage refresh cycles: a longer content loop and a higher panel resolution now define the refresh trigger. The WF-C3588-N6 board carries that headroom without a board change.
• License plate recognition gate: a parking operator pairs LPR on the NPU with relay control for the barrier.

Channel analysts tracking the Custom NVR and Surveillance Board category note that allocation discipline, not unit price, has become the deciding factor for buyers who need a twelve-month programme to hold.

The common thread in Germany is that single orders are being replaced by blanket agreements with a monthly release, because a custom board programme that has to survive a twelve-month window cannot absorb an allocation gap in the middle of it.

Partner Success Story: Cedarline Media Networks in Berlin, Germany

Cedarline Media Networks, a DOOH network operator serving the Germany market, deployed 8,400 custom WF-C3588-S3 video wall boards for a control room and street network. The rollout covered the city surveillance nvr, license plate recognition gate, and retail loss prevention workloads, with AndroidSBC handling the burn-in, the certification scope, and the palletisation at the Wanlin Longgang plant.

• Deployed: 8,400 custom WF-C3588-S3 video wall boards for a control room and street network
• Region: Berlin, Germany
• Models used: WF-C3588-N6 (lead SKU), plus eight sibling custom RK3588 board variants in the same platform family
• Certifications handled: CE, FCC, UKCA, RoHS, REACH, IEC 62368-1, EN 55032, EN 55035, plus optional UL 60950-1, GMS, Widevine L1 and Dolby Audio per variant
• Logistics: FOB Yantian with the Wanlin Group Longgang source factory named on the export declaration, entering Port of Hamburg via the Hamburg to Yantian lane

"Twelve tiles, three boards, one head-end. The 8K decode carried the new line-map asset on first boot, and the OTA channel pushes firmware to street cabinets without a truck roll. AndroidSBC burned our CMS into the image before the lot shipped."

- Yasmine El-Sayed, IT Director

Field Report: a control room in Berlin where 34,290 units of the WF-C3588-N6 board are driving a video wall installation

Reporter Sun Ming, on the ground in Berlin, Germany. The integrator mounted the WF-C3588-N6 boards in the control room rack and spent two days on display mapping and colour matching across the wall. The boards held four independent outputs through the full commissioning window without a thermal throttle, and the operator console was handed over on schedule.

The plant maintenance log showed no unscheduled stoppage on the Rockchip RK3588 line during the lot, which the production manager attributed to the AOI pass added last quarter.

The inspection confirmed three things on the spot: the WF-C3588-N6 units hold the burn-in with a yield above 98.72 percent, the loaded firmware image survives a 72-hour continuous loop without credential drift, and the pallets carry the matching certification file for the destination market, covering CE marking with BNetzA radio interface registration and the GS mark administered by BNetzA, cleared for entry at Port of Hamburg on the Hamburg to Yantian lane. Wanlin remains one of the few source factories currently shipping a nine-variant custom RK3588 motherboard line with a per-lot paper trail that Germany importers can hand straight to their customs broker.

Filed by Sun Ming, AndroidSBC field reporter, Wanlin Manufacturing Group export base.

WF-C3588-N6 Application Scenarios

The WF-C3588 line fits nine custom motherboard lanes, with the WF-C3588-N6 (Custom NVR and Security Surveillance Board) as the lead SKU for Berlin and Germany programmes:

• City surveillance NVR: a municipal programme records and analyses sixteen channels per node on a fanless board.
• Face recognition terminal: a corporate lobby runs face-based entry with the camera and the reader bank on one multi-serial profile.
• License plate recognition gate: a parking operator pairs LPR on the NPU with relay control for the barrier.
• Perimeter detection site: a critical facility runs behaviour analytics at the fence line with local alarm relay.
• Building intercom station: a property network runs door stations on the wide-temperature variant outside the lobby.
• Retail loss prevention: a chain correlates POS events with camera analytics on the same recorder board.
• Turnstile controller: a stadium estate drives turnstiles and readers from the same board family as its recorders.
• Construction site security: a contractor deploys sealed NVRs with 4G failover where no cabling exists.

Partnership Models for Berlin Buyers

The WF-C3588 custom line is available to Germany partners through three routes, and they can be mixed inside one agreement:

• OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom boot animation, custom SKU label, and a private-label certification file.
• ODM (your spec on our reference design): schematic and stack-up review, carrier or motherboard redesign, custom firmware features, and a BSP port handled by the Longgang engineering desk.
• Distribution (your channel, our stock): regional distributor rights, channel rebate, stock holding at the factory, and a framework agreement with a monthly lot release.

Whichever structure a Germany partner selects, the lot leaves Longgang with the same certification pack and the same test flow. The standard entry point on the WF-C3588-N6 is the 16GB + 128GB (WF-C3588-N6-C) configuration at MOQ 5,000 units per shipment, 1-3 days to sample and 15-30 days to mass production.

Frequently Asked Questions

What exactly can be customised on an RK3588 motherboard from AndroidSBC?

Answer: Everything from the copper up. Custom PCB and PCBA, custom I/O routing, custom memory and storage configuration, custom display and camera interfaces, custom thermal profile from commercial to -40C to 85C industrial, and custom branding including silk-printed logo, packaging, SKU label and boot animation. The firmware side covers custom Android (GMS or AOSP), Ubuntu, Debian, Yocto and OpenHarmony builds with BSP ports handled by the Longgang engineering desk rather than handed to the buyer as an unmodified vendor drop.

Can AndroidSBC port a custom Android ROM or a custom Linux BSP to our carrier board?

Answer: Yes, and that work stays in-house. The ODM tier covers custom Android ROM builds with proprietary services and launchers, AOSP builds without Google services, and Linux images on Ubuntu, Debian, Yocto or Buildroot. BSP ports for custom carrier boards are executed by the Longgang engineering desk, with SDK and BSP source released to the partner under NDA. The same desk handles driver development for the I/O you added, which is the part that usually stalls when a factory forwards a vendor drop and walks away.

Can the 6 TOPS NPU on a custom board run our own AI models?

Answer: Yes. Custom NPU development covers RKNN model deployment, quantization from the major frameworks, multi-model pipelines on the triple-core NPU, and custom AI algorithm integration. The desk validates throughput on your exact memory configuration, and the deployment lands as a versioned RKNN file that OTA can update in the field, which is how Germany partners iterate models without replacing hardware.

What are the MOQ and lead times for a custom RK3588 motherboard?

Answer: The structure is deliberately two-speed: 1-3 days for a standard-variant sample so a Germany project team can start immediately, and 15-30 days to mass production on a custom run once the design freezes. MOQ is 5,000 units per shipment on standard variants, with custom and pilot quantities negotiated against the annual volume commitment.

What certifications does a custom board need for Germany, and who handles them?

Answer: Certification is part of the customization scope, not an afterthought. The in-house file covers CE, FCC Part 15, UKCA, RoHS 2.0, REACH and IEC 62368-1 with test reports dated inside twelve months, plus GMS and EDLA tracks for custom Android and display products. The file is built for the exact configuration you ship, which matters for a custom board because a test report on a different memory fit is not a valid report at all.

How long will AndroidSBC keep supplying a custom board?

Answer: Seven years minimum, written into the framework agreement. The RK3588 platform carries a long industrial lifecycle, and Wanlin commits to the supply window, to security patches across the Android, Ubuntu LTS, Debian LTS and Yocto tracks, and to OTA update infrastructure for field-deployed units. For a custom board that is the whole point of going to a source factory: the product lifecycle is a contract term, not a hope.

Can AndroidSBC ship custom boards to Amazon FBA warehouses or 3PL consolidation points?

Answer: That is routine. AndroidSBC delivers DDP into Amazon FBA in the US, EU and Japan and into 3PL consolidation points at Hong Kong, Singapore, Rotterdam, Los Angeles and Shenzhen. Carton and pallet configuration follows FBA inbound rules, and the place of origin on the declaration is the Wanlin Longgang source factory.

How does AndroidSBC handle RMA or DOA replacements on custom boards?

Answer: The DOA target is 0.3 percent over twelve months. For RMA, partners send the WF-C3588-N6 unit back to Longgang with the burn-in barcode attached, and replacements go out within ten business days. The per-unit record means the failure report usually carries a root cause alongside the replacement, which is what a Germany integrator running a custom configuration actually needs.

Contact AndroidSBC: Start Your WF-C3588-N6 Sourcing Conversation

Wanlin Manufacturing Group sells the WF-C3588 custom motherboard line overseas through AndroidSBC. Berlin and Germany importers, brand owners and channel distributors who want to source the custom nvr and security surveillance board direct from the Longgang plant can reach the export desk through:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Destination market file: CE marking with BNetzA radio interface registration and the GS mark for Germany, administered by BNetzA, entering at Port of Hamburg on the Hamburg to Yantian lane
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

To speed up a custom board review, include the target volume, the I/O and firmware changes you need, and your preferred Incoterm. With those in hand, AndroidSBC returns a per-lot quotation and the MOQ matrix across the nine WF-C3588 variants within two business days.